Solutions
APPLICATIONS
NEWS
Services
- Pre-Owned & Trade-In Programs
- Technical Service, Training, & Parts
About
Contact Us

Request a Demonstration

Please fill out the form below to request a demonstration.

*Please note that all times are Eastern

–

*Please submit requests at least 3 weeks in advance of the demo/training date

–

*Please note that demonstrations in Andover will not be held on Mondays or Fridays, in-person or virtually

–

*If the customer or trainee company has requested samples to be run, no dates can be booked until the samples have been tested and approved. Please submit a “Sample Request” to begin this process.

–

Internal Request Type and Arrangements
Company name*
Request type:*
Does the customer have samples to run?*
- Yes
- No
Please confirm:*
- Samples have been pre-approved by the demo team
If the sample hasn't been pre-approved, please submit a "Sample Test" request
Date of sample approval:*
Please provide a brief summary of the application:*
Which machine(s) is the customer interested in testing?*
- Roll-to-Booklet (with StitchLiner Mark V)
- Roll-to-Stack (with UW8 Unwinder and CS8-II Cutter)
- Roll-to-Fold (with DP8 Dynamic Perforator and AF-566F Folder)
- StitchLiner Mark IV (with VAC-L600H Collator)
- SPF-200L Bookletmaker (with ST-40 Stacker and VAC-1000 Collator)
- AF-408F Folder
- AFV-566FKT Folder
- AFV-566/TV-564 Folder
- SmartStacker
- SmartSlitter
- BQ-270V Perfect Binder
- BQ-500 Perfect Binder (with HT-300 Trimmer)
- Case Binding Line (with BQ-500, HT-1000V, LBF-500 Book Block Feeder, GF-500 Gauze Feeder, ESF-1000 End Sheet Feeder)
- CRF-362 Creaser/Folder
- RD-N4055 Die Cutting System
- SmartSlitter
- APC-610 Cutter
- Finishing Automation Workflow (including iCE LiNK)
Please describe the application and materials:*
Samples shipment tracking number, if applicable:
Preferred demonstration location:*
Preferred demonstration location:*
Training Location:*
Training Location:*
Please provide the customer's address:*
Training Type:*
Training Type:*
Training Type:*
Training Type:*
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo date (Note - Any requests for Mondays and Fridays will not be accepted):*
MM slash DD slash YYYY
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred demo time (Eastern time)*

: Hours

Minutes

AM/PM
Preferred virtual demo time (Eastern time - No time earlier than 10am will be accepted)*

: Hours

Minutes

AM/PM
Preferred virtual demo time (Eastern time - No time earlier than 10am will be accepted)*

: Hours

Minutes

AM/PM
Preferred virtual demo time (Eastern time - No time earlier than 10am will be accepted)*

: Hours

Minutes

AM/PM
Preferred virtual demo time (Eastern time - No time earlier than 10am will be accepted)*

: Hours

Minutes

AM/PM
Preferred virtual demo time (Eastern time - No time earlier than 10am will be accepted)*

: Hours

Minutes

AM/PM
Preferred virtual demo time (Eastern time - No time earlier than 10am will be accepted)*

: Hours

Minutes

AM/PM
Preferred virtual demo time (Eastern time - No time earlier than 10am will be accepted)*

: Hours

Minutes

AM/PM
Preferred virtual demo time (Eastern time - No time earlier than 10am will be accepted)*

: Hours

Minutes

AM/PM
Preferred virtual demo time (Eastern time - No time earlier than 10am will be accepted)*

: Hours

Minutes

AM/PM
Preferred virtual demo time (Eastern time - No time earlier than 10am will be accepted)*

: Hours

Minutes

AM/PM
Preferred virtual demo time (Eastern time - No time earlier than 10am will be accepted)*

: Hours

Minutes

AM/PM
Preferred virtual demo time (Eastern time - No time earlier than 10am will be accepted)*

: Hours

Minutes

AM/PM
Preferred training start date:*
MM slash DD slash YYYY
Preferred training start date:*
MM slash DD slash YYYY
Preferred training start time (Eastern time):*

: Hours

Minutes

AM/PM
Preferred training start time (Eastern time):*

: Hours

Minutes

AM/PM
Which arrangements will need to be made for the customer?*
- Flights
- Lodging
NOTE: If customer is making their own arrangements, please direct them to www.sdmc.com/finish360 to register or you can register them on their behalf. This form is only for those needing travel arrangements.
Estimated Arrival Date:*
Estimated Departure Date:*
Which arrangements will need to be made?*
- Flights
- Lodging
- Ground transportation
- Lunch at demo
- None/Customer is making own arrangements
Which arrangements will need to be made?*
- Flights
- Lodging
- Ground transportation
- Lunch at demo
- None/Customer is making own arrangements
Which arrangements will need to be made?*
- Flights
- Lodging
- Ground transportation
- Lunch at demo
- None/Customer is making own arrangements
Which arrangements will need to be made?*
- Flights
- Lodging
- Ground transportation
- Lunch at demo
- None/Customer is making own arrangements
Which arrangements will need to be made?*
- Flights
- Lodging
- Ground transportation
- Lunch at demo
- None/Customer is making own arrangements
Which arrangements will need to be made?*
- Flights
- Lodging
- Ground transportation
- Lunch at demo
- None/Customer is making own arrangements
Which arrangements will need to be made?*
- Flights
- Lodging
- Ground transportation
- Lunch at demo
- None/Customer is making own arrangements
Which arrangements will need to be made?*
- Flights
- Lodging
- Ground transportation
- Lunch at demo
- None/Customer is making own arrangements
Please list any dietary preferences or food allergies:*
Please provide any additional relevant information about arrangements, including preferred travel dates:
Products and Applications
Application details - Please be specific*
Application details - Please be specific*
Product Area(s) of Interest:*
- Perfect Binding/Trimming
- Slitting/Creasing
- Collating
- Die Cutting
- Saddlestitching/Bookletmaking
- Folding
- Continuous Feed Inkjet Feeding and Finishing
- Finishing Automation Workflow
- Inspection Systems
Product(s) to be demonstrated:*
- Roll-to-Booklet (with StitchLiner Mark V)
- Roll-to-Stack (with UW8 Unwinder and CS8-II Cutter)
- Roll-to-Fold (with DP8 Dynamic Perforator and AF-566F Folder)
- StitchLiner Mark IV (with VAC-L600H Collator)
- SPF-200L Bookletmaker (with ST-40 Stacker and VAC-1000 Collator)
- AF-408F Folder
- AFV-566FKT Folder
- AFV-566/TV-564 Folder
- SmartStacker
- SmartSlitter
- BQ-270V Perfect Binder
- BQ-500 Perfect Binder (with HT-300 Trimmer)
- Case Binding Line (with BQ-500, HT-1000V, LBF-500 Book Block Feeder, GF-500 Gauze Feeder, ESF-1000 End Sheet Feeder)
- CRF-362 Creaser/Folder
- RD-N4055 Die Cutting System
- APC-610 Cutter
- Finishing Automation Workflow (including iCE LiNK)
Product(s) to be demonstrated:*
- Roll-to-Booklet (with StitchLiner Mark V)
- Roll-to-Stack (with UW8 Unwinder and CS8-II Cutter)
- Roll-to-Fold (with DP8 Dynamic Perforator and AF-566F Folder)
- StitchLiner Mark IV (with VAC-L600H Collator)
- SPF-200L Bookletmaker (with ST-40 Stacker and VAC-1000 Collator)
- AF-408F Folder
- AFV-566FKT Folder
- AFV-566/TV-564 Folder
- SmartStacker
- SmartSlitter
- BQ-270V Perfect Binder
- BQ-500 Perfect Binder (with HT-300 Trimmer)
- Case Binding Line (with BQ-500, HT-1000V, LBF-500 Book Block Feeder, GF-500 Gauze Feeder, ESF-1000 End Sheet Feeder)
- CRF-362 Creaser/Folder
- RD-N4055 Die Cutting System
- APC-610 Cutter
- Finishing Automation Workflow (including iCE LiNK)
Product(s) to be trained on:*
- Roll-to-Booklet (with StitchLiner Mark V)
- Roll-to-Stack (with UW8 Unwinder and CS8-II Cutter)
- Roll-to-Fold (with DP8 Dynamic Perforator and AF-566F Folder)
- StitchLiner Mark IV (with VAC-L600H Collator)
- SPF-200L Bookletmaker (with ST-40 Stacker and VAC-1000 Collator)
- AF-408F Folder
- AFV-566FKT Folder
- AFV-566/TV-564 Folder
- SmartStacker
- SmartSlitter
- BQ-270V Perfect Binder
- BQ-500 Perfect Binder (with HT-300 Trimmer)
- Case Binding Line (with BQ-500, HT-1000V, LBF-500 Book Block Feeder, GF-500 Gauze Feeder, ESF-1000 End Sheet Feeder)
- CRF-362 Creaser/Folder
- RD-N4055 Die Cutting System
- SmartSlitter
- APC-610 Cutter
- Finishing Automation Workflow (including iCE LiNK)
Product(s) to be trained on:*
- Roll-to-Booklet (with StitchLiner Mark V)
- Roll-to-Stack (with UW8 Unwinder and CS8-II Cutter)
- Roll-to-Fold (with DP8 Dynamic Perforator and AF-566F Folder)
- StitchLiner Mark IV (with VAC-L600H Collator)
- SPF-200L Bookletmaker (with ST-40 Stacker and VAC-1000 Collator)
- AF-408F Folder
- AFV-566FKT Folder
- AFV-566/TV-564 Folder
- SmartStacker
- SmartSlitter
- BQ-270V Perfect Binder
- BQ-500 Perfect Binder (with HT-300 Trimmer)
- Case Binding Line (with BQ-500, HT-1000V, LBF-500 Book Block Feeder, GF-500 Gauze Feeder, ESF-1000 End Sheet Feeder)
- CRF-362 Creaser/Folder
- RD-N4055 Die Cutting System
- SmartSlitter
- APC-610 Cutter
- Finishing Automation Workflow (including iCE LiNK)
Attendee Information
Will a dealer/partner be attending?*
- Yes
- No
Will a dealer/partner be attending?*
- Yes
- No
Dealer or partner company name:*
Name of dealer/partner contact(s) attending - One name per line:*
Email of dealer/partner contact(s) attending - One email per line:*
Name of customer(s) attending - One name per line:*
Name of customer(s) attending - One name per line:*
Name of person(s) attending the training - One name per line:*
Name of person(s) attending the training - One name per line:*
Email of customer(s) attending - One email per line:*
Email of customer(s) attending - One email per line:*
Email of person(s) attending the training - One email per line:*
Email of person(s) attending the training - One email per line:*
The customer(s) will take part in:*
- Select All
- Lunch, Wednesday (12-1:30pm)
- Reception, Wednesday (3-5pm)
- Lunch, Thursday (12-1:30pm)
Your Information
Name of person submitting this form:*
Name of person submitting this form:*
Name of person submitting this form:*
Name of person submitting this form:*
Name of person submitting this form:*
Name of person submitting this form:*
Your email:*
Your email:*
Your email:*
Your email:*
Your email:*
Your email:*
Email of relevant Regional Sales Manager:*
Email of relevant Regional Sales Manager:*
Email of relevant Regional Sales Manager:*
Email of relevant Regional Sales Manager:*
Email of relevant Regional Sales Manager:*
Email of relevant Regional Sales Manager:*
Additional comments
Additional comments
Additional comments
Additional comments
Additional comments

FinishLine Newsletter: Subscribe now

Solutions

Continuous Feed Solutions

Saddlestitching

Perfect Binding

Slitting & Creasing

Cutting & Trimming

Tracking & Inspection

Finishing Automation Workflow

Digital Duplicating

About

Company Overview

National Demonstration & Training Center

News

Contact Us

p: (978) 470-1920

f: (978) 470-2771

e: info@sdmc.com

Headquarters
10 Connector Road
Andover, MA 01810

Our Privacy Policy

Copyright © 2024 Standard Duplicating Machines Corporation. All Rights Reserved.